The Factors Influencing The Quality Of Extraction Thimbles
Nowadays, cellulose extraction thimbles and glass fiber extraction thimbles are widely applied in Soxhlet extractors. Generally, this is a kind of safe, convenient and effective method for extracting solid and semisolid matters. On the other hand, Soxhlet extractors are extremely effective for the inflammable and poisonous solution and solution that is easy to give off a smell.
If multiple extraction cycles are required to dissolve the desired compound, using extraction thimbles are the best choices in Soxhlet extractors or automized extractors. Equipped with Hawach extraction thimbles, the extraction units can save lots of handling time and always make the extraction complete.
With efficient and innovative technology, Hawach cellulose extraction thimbles are made of noble cellulose fibers and cotton linters. The cotton linters we use are free from impurities totally. Its consistent high porosity ensures fast flow through. Its high fitting accuracy can be for all available extraction systems. And the max using temperature is 100 ºC. Cellulose extraction thimbles are made up of cellulose cotton wool. They have the advantages of high purity, strong mechanical strength, and intensive retention force. The standard wall thickness of the cellulose extraction thimble is about 1 mm, with the grain retention rate of 10 μm.
Moreover, the wall thickness of thickened cellulose extraction thimble is about 2 mm with a grain retention rate of 6 μm. Normally, the thickened cellulose extraction thimbles are used for special requirements, including high retention force, wet strength increasing or dry strength increasing.
Besides cellulose extraction thimbles, Hawach glass fiber extraction thimbles are made of high purity borosilicate glass fibers. When the compatibility of cellulose cartridges cannot meet the requirements of the application, glass fiber extraction thimble is the one you need. Widely used in the analysis of air and waste gas to collect solid particles, they can be used at temperatures above 120ºC.Glass fiber extraction thimbles are made up of 100% pure boron silicate glass fiber. They are suitable for special requirements as well. In general, there are no adhesion agents or annexing agents in glass fiber extraction thimbles.